ION - Drum Rocker Core

Below are all the different types of ION. Select the device of your choice, to download the manual

Contents

lan DRUM ROCKER CORE ENGLISH 1 Place base supports A on floor 2 Connect side supports B to base supports A 3 Connect center support C to side supports B 4 Connect side arms D to side supports B Wing nuts on each side arm should face out 5 Loosen wing nuts of drum pads E and turn the metal rod so it is perpendicular to the pad Tighten wing nuts to secure 6 Connect pads to the kit by inserting the metal rod H into the clamps and tightening the wing nuts 7 Take remote module K out of the box and loosen the wingnut Insert the metal rod J as shown in picture and tighten the wing nut 8 Connect the module to the last remaining clamp on the center support CAUTION TO AVOID DAMAGE TO THE MODULE DO NOT MOUNT TOO CL ...